This is a Burkert direct operating 2/2 way solenoid valve with 32×46 mm SFB flange and a 24 V DC coil. The valve has a polypropylene (PP) housing with FKM sealing and an orifice size of 5 mm. SFB is a Burkert specific flange design that enables compact mounting of multiple valves on a manifold. The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied. As it is direct operating, no pressure differential over the valve is needed to open the valve. Suitable for a pressure of -1 – 1 bar (-15 – 15 psi) and a maximum temperature of 80 °C (176 °F). The valve has a Kv-value of 0.2 m3/h, this translates to a flow rate of 3 l/min at a differential pressure of 1 bar (for water). In imperial units: Cv = 0, which means 0 GPM @ 1 psi pressure drop. For many applications it is enough to select a valve based on the thread size and orifice diameter. For more accurate sizing, use the Kv-value with our easy to use valve sizing calculator. This model is media separated. This means that the working parts such as the spring are separated from the media by a flexible membrane, which makes it possible to use of slightly contaminated and aggressive media. The PP (polypropylene) housing is suited for a wide range of chemical processes. The FKM (fluorine rubber or Viton) sealing has excellent chemical properties, is suited for most oils and solvents but it cannot handle hot water or steam. Please note that the internal valve parts, such as the stainless steel plunger and springs, are also in contact with the medium and must be chemically compatible. Consult our chemical resistance chart to verify compatibility of housing and seals with the medium. The manual override feature can be used to commission the system. Suitable for vacuum applications. The valve has an IP65 rating if properly connected.
Pros:
- Suitable for vacuum applications
- Aggressive media are possible thanks to the media separated design
- The manual override is ideal for commissioning and in case of power outage
- Good protection against the environment thanks to the IP65 rating
- Solenoid valves open and close very fast compared to many other valve types
- SFB flange design enables compact mounting of multiple valves on a manifold
Cons:
- Solenoid valves are very sensitive to dirt and can only be used with clean liquids and gases
- The coil may get hot when energized. A well ventilated environment is recommended
Series:
The Bürkert 0331 valve is a direct-acting, media separated pivoted armature valve. Orifices up to DN 4 and pressure ranges from 0 to 16 bar. The distinct feature of this valve from the 0330 model is the absence of threads, replaced by a Bürkert SFB (Specific Flange design Bürkert) flange connection at the bottom. This flange can be used to mount the valve onto a manifold or to mount onto a bigger valve (for example the Type 5282) and act as a pilot valve. The 0331 valve comes in 2/2 and 3/2-way versions. The 3/2-way versions are available as normally open, normally closed, distributor or mixing valve. The medium separated design makes this valve suitable for aggressive or slightly contaminated media. The standard brass housing satisfies all European drinking water requirements. The 0331 is equipped with manual override for commissioning and testing. ATEX explosion approved versions are also available.
Please note: this product is made to order and can unfortunately not be returned.
Specifications
Connection size : 32×46 mm SFB
Connection type : Flange SFB
Function : Normally closed
Voltage : 24 V DC
Material : Plastic
Seal material : FKM (FPM)
Operation : Direct
Recommended for : Water,Air,Lubricant,Combustible gases,Sea water
Min pressure difference (bar) : -1
Max pressure (bar) : 1
Kv value [m3/h] : 0.2
Features : Manual override,For vacuum,Media separation
Material quality : Polypropylene (PP)
Valve bore (mm) : 5
Max temperature (°C) : 80
Electrical connection : DIN-A
Degree of protection (IP) : IP65
Nominal power (W) : 8
Valve ports/positions : 2/2 way
Duty cycle : 40 % max. 30 min. on, 60 % rest
Max. ambient temp. (°C) : 55
Actuation : Pivot
Valve construction : Valve complete
Valve seat material : Polypropylene (PP)
Sealing toward outside material : FKM (FPM)
Flow direction : Below seat
Installation length (mm) : 46
Reviews
There are no reviews yet.