Uxcell 0.4mm 3D Printer Nozzle, 14pcs M6 Thread for V5 V6 3mm Extruder Print, Brass

About this item

• [Size]: Material: Brass; Screw Thread: M6; Nozzle Diameter: 0.4mm; Input Diameter: 3.2mm; Total Dimension: 12.5x7mm / 0.5×0.28″(L*W).
• [Compatibility]: for 3mm V5 V6 3D printers.
• [Brass Material]: Not easy to get rust or erosion, provides long service life.
• [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
• [Application]: Extruder brass print heads are usually applied to print non-abrasive material such as PLA, ABS, Nylon, etc.

Feature:
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material such as PLA, ABS, Nylon, etc.
Specification:
Material: Brass
Screw Thread: M6
Nozzle Diameter: 0.4mm
Input Diameter: 3.2mm
Total Dimension: 12.5x7mm / 0.5×0.28″(L*W)
Package Content: 14pcs x Brass Nozzle
NOTE:
Small accessories, please keep away from .
After replacing the nozzle, please adjust the distance between the nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle, and heat the block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block to avoid burning.