LED spotlight 10 W (equivalent to 140 W halogen spotlight) with motion sensor for wall mounting, detection range 10 m with 180°, undercrawl protection, neutral white (4000 K), automatic light control depending on presence and light intensity, orientation light with adjustable dim level, adjustable follow-up time, integrated cooling in colour of housing.
Direct-LED for maximum light output, High-Tech matrix-LED modules, wall lighting possible due to the rotatable 180° LED module, detection restriction with included sticker.
Specifications
Suitable for surface mounting : Yes
Suitable for built-in mounting : No
Suitable for suspended mounting : No
Suitable for ceiling mounting : No
Suitable for traverse mounting : No
Suitable for pedestal/floor mounting : No
Suitable for light-track mounting : No
Suitable for clamp-mounting : No
Suitable for low voltage cable system : No
Adjustability : Rotating and swivelling
With movement sensor : Yes
With light sensor : Yes
Lamp type : LED not exchangeable
With light source : Yes
Suitable for number of lamps : 0
Lamp holder : None
Material : Plastic
Surface protection : Lacquered
Color housing : Black
Material cover : Plastic, transparent
Surface brushed : No
Voltage-type : AC
Nominal voltage (V) : 230 V to 230 V
LED nominal current at constant current (mA) : 0 mA to 10 mA
Type of control gear : Not required
With control gear : Yes
Dimming depending on control gear : No
Dimming 0-10 V : No
Dimming 1-10 V : No
Dimming DALI : No
Dimming DMX : No
Dimming DSI : No
Dimming potentiometer (integrated) : No
Dimming GPRS : No
Dimming LineSwitch : No
Dimming manufacturer’s proprietary system : Yes
Dimming mains voltage modulation : No
Dimming phase cut-off : No
Dimming phase cut-on : No
Dimming programmable : No
Dimming RF : No
Dimming Sine Wave Reduction : No
Dimming Touch and Dim : No
Dimming Zigbee : No
Dimming with push-button : No
No dim function : No
Reflector : High-gloss
Light distributor : Reflector
Light sharing : Symmetric
Beam angle : Wide beam 41-80°
Light outlet : Direct
Energy efficiency class : A
Energy efficiency class of the built-in lamp : A++, A+, A (LED)
Total harmonic distortion : 27
Degree of protection (IP) : IP55
Degree of protection (NEMA) : 4
Impact strength : IK04
Protection class : I
Rated ambient temperature according to IEC62722-2-1 (°C) : -20 °C to 45 °C
Max. system power (W) : 10
Colour of light : White
Colour temperature (K) : 4000 K to 4000 K
Color rendering index CRI : 80-89
Luminous flux (lm) : 840 lm to 840 lm
Rated luminous flux according to IEC 62722-2-1 (lm) : 840
Power factor : 0.95
Width (mm) : 50
Height/depth (mm) : 160
Length (mm) : 80
Type of wiring : Ending
Number of poles : 4
Conductor cross section (mm²) : 2.5
Connectable conductor cross section (mm²) : 0 mm² to 2.5 mm²
Connection type : Screwed terminal
Luminaire with limited surface temperature, sign “D“ : No
Filament test according to IEC 60695-2-11 : 650 °C – 30 s
Luminaire efficacy (lm/W) : 80
Photobiological safety according to EN 62471 : RG0
Covering of the luminaire with thermally insulating material possible : No
Color consistency (McAdam ellipse) : SDCM6
Reviews
There are no reviews yet.