Steinel Xled Home 2 XL downlight/spotlight/light, subcategory floodlight, luminous flux 2120lm, effective luminous flux according to IEC 2120lm, temperature 3000K, light color white, suitable for lamp power 20W, system power 20W, housing white, degree of protection (IP) IP44, with motion sensor.
Specifications
Suitable for surface mounting : Yes
Suitable for built-in mounting : No
Suitable for suspended mounting : No
Suitable for ceiling mounting : No
Suitable for traverse mounting : No
Suitable for pedestal/floor mounting : No
Suitable for light-track mounting : No
Suitable for clamp-mounting : No
Suitable for low voltage cable system : No
Adjustability : Rotating and swivelling
With movement sensor : Yes
With light sensor : Yes
Lamp type : LED not exchangeable
With light source : Yes
Suitable for number of lamps : 0
Lamp holder : Other
Material : Plastic
Surface protection : Other
Color housing : White
Material cover : Plastic, opal
Surface brushed : No
Voltage-type : AC
Nominal voltage (V) : 220 V to 240 V
Type of control gear : LED operating device current-controlled
With control gear : Yes
Dimming depending on control gear : No
Dimming 0-10 V : No
Dimming 1-10 V : No
Dimming DALI : No
Dimming DMX : No
Dimming DSI : No
Dimming potentiometer (integrated) : No
Dimming GPRS : No
Dimming LineSwitch : No
Dimming manufacturer’s proprietary system : No
Dimming mains voltage modulation : No
Dimming phase cut-off : No
Dimming phase cut-on : No
Dimming programmable : No
Dimming RF : No
Dimming Sine Wave Reduction : No
Dimming Touch and Dim : No
Dimming Zigbee : No
Dimming with push-button : No
No dim function : Yes
Reflector : None
Light distributor : None
Light sharing : Symmetric
Beam angle : Extreme wide beam>80°
Light outlet : Direct
Energy efficiency class : A++
Energy efficiency class of the built-in lamp : A++, A+, A (LED)
Energy efficiency class of the provided exchangeable built-in lamp : A++
Total harmonic distortion : 54
Degree of protection (IP) : IP44
Impact strength : IK03
Protection class : II
Rated ambient temperature according to IEC62722-2-1 (°C) : -20 °C to 40 °C
Suitable for lamp power (W) : 20 W to 20 W
Max. system power (W) : 20
Colour of light : White
Colour temperature (K) : 3000 K to 3000 K
Color rendering index CRI : 80-89
Luminous flux (lm) : 2120 lm to 2120 lm
Rated luminous flux according to IEC 62722-2-1 (lm) : 2120
Power factor : 0.88
Width (mm) : 180
Height/depth (mm) : 240
Length (mm) : 161
Type of wiring : Suitable for through wiring
Number of poles : 2
Connectable conductor cross section (mm²) : 0.5 mm² to 0.5 mm²
Connection type : Other
Luminaire with limited surface temperature, sign “D“ : No
Filament test according to IEC 60695-2-11 : 650 °C – 30 s
Luminaire efficacy (lm/W) : 106
Photobiological safety according to EN 62471 : Other
Suitable for workplace according to EN 12464-1 : No
Covering of the luminaire with thermally insulating material possible : No
Color consistency (McAdam ellipse) : SDCM3
Reviews
There are no reviews yet.