This Acti9 iTL is a modular impulse relay. This single-pole device has one normally open contact. The rated current is 16A, with an operating voltage ranging from 24VAC to 250VAC. It operates with a control voltage of 230VAC to 240VAC or 110VDC. The electrical endurance can reach up to 200,000 cycles for AC-21 or 100,000 cycles for AC-22. The switching frequency is either five switching operations per minute or 100 switching operations per day. The duration of the command order should be between 50 milliseconds to 1 second.
It is primarily used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is either 50Hz or 60Hz. It can be mounted on a DIN rail. The pollution degree is 3. The overvoltage category is IV.
The dimensions are 18mm width, 84mm height, and 60mm depth. It has a degree of protection of IP20 and IP40 when enclosed. The operating temperature ranges from -20°C to 50°C, while the storage temperature ranges from -40°C to 70°C. This product complies with the IEC/EN 60669-1 and IEC/EN 60669-2-2 standards.
Specifications
Function : Mechanical switch
Mounting method : DIN rail
Width in number of modular spacings : 1
Built-in depth (mm) : 43.5
Number of contacts as normally open contact : 1
Number of contacts as normally closed contact : 0
Number of contacts as change-over contact : 0
Control voltage 1 (V) : 230 V to 240 V
Type of control voltage 1 : AC
Frequency control voltage 1 (Hz) : 50 Hz to 60 Hz
Control voltage 2 (V) : 110 V to 110 V
Type of control voltage 2 : DC
Frequency control voltage 2 (Hz) : 0 Hz to 0 Hz
Rated switch current (A) : 16
Supply voltage (V) : 24 V to 250 V
Voltage type of supply voltage : AC
Max. incandescent lamp load (W) : 1600
Max. load fluorescent lamp (VA) : 1300
Max. load fluorescent lamp (Duo circuit) (VA) : 2000
Max. load fluorescent lamp (parallel compensated) (VA) : 900
Max. switching current (cos phi = 0.6) (A) : 16
Manual override : Yes
Reviews
There are no reviews yet.