This Acti 9 iTL is a modular and reliable impulse switch. This 2-pole device has 2 NO contacts. The nominal current is 16A, with an operating voltage of 24V AC to 250V AC and it works with 24V AC or 12V DC control voltage. The electrical durability is guaranteed up to 200,000 cycles AC-21 or 100,000 cycles AC-22.
The maximum switching frequency is 5 switching movements per minute or 100 switching movements per day. The duration of the command should be between 50 ms and 1s. The degree of protection is IP20 and becomes IP40 when this product is placed in a housing. It is easy to mount on a DIN rail.
It is primarily used for light control applications. This product complies with IEC/EN 60669-1, IEC/EN 60669-2-2.
Specifications
Function : Mechanical switch
Mounting method : DIN rail
Width in number of modular spacings : 1
Built-in depth (mm) : 43.5
Number of contacts as normally open contact : 2
Number of contacts as normally closed contact : 0
Number of contacts as change-over contact : 0
Control voltage 1 (V) : 24 V to 24 V
Type of control voltage 1 : AC
Frequency control voltage 1 (Hz) : 50 Hz to 60 Hz
Control voltage 2 (V) : 12 V to 12 V
Type of control voltage 2 : DC
Frequency control voltage 2 (Hz) : 0 Hz to 0 Hz
Rated switch current (A) : 16
Supply voltage (V) : 24 V to 250 V
Voltage type of supply voltage : AC
Max. incandescent lamp load (W) : 1600
Max. load fluorescent lamp (VA) : 1300
Max. load fluorescent lamp (Duo circuit) (VA) : 2000
Max. load fluorescent lamp (parallel compensated) (VA) : 900
Max. switching current (cos phi = 0.6) (A) : 16
Manual override : Yes
Reviews
There are no reviews yet.