About this item
- MR115-2RS (I.D.=5mm, O.D.=11mm, Thickness=4mm)
- MR115-2RS bearings are Sealed on both sides to keep lubricant in
- Chrome Steel races for durability and corrosion resistance
- ABEC-3, Z1 Noise Level for most general use
- Number of Pack: 10 Pcs
Note:
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
-Single-row, pre-lubricated, normal accuracy.
-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selection Guide:
Shields (Designation Suffix Z/ZZ) – High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) – Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
Model: MR115-2RS
Shield Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5mm
Outer Diameter (D): 11mm
Thickness (B): 4mm
Accuracy Class: ABEC-3
Noise Level: Z1
Number of Pack: 10 Pcs
Reviews
There are no reviews yet.