200 Pcs 4mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone

About this item

• Semi-Tubular Rivet ; 4mm Shank Diameter, 8mm Shank Length; Aluminum
• Can be used to fasten similar or different materials of multiple work-pieces.
• Long length rivets can be applied without buckling or bending the rivet shank.
• Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole
• Rivets can also be used with a rivet cap to improve appearance of clinched end.

Descriptions:

1. Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.
2. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.
3. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
4. Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.

Specifications:

Material: Aluminum

Shank Diameter(D): 4mm/0.16inch

Shank Length(L): 8mm/0.31inch

Head Diameter(A): 7.5mm/0.30inch

Totally Length(L+T):9mm/0.35inch

Color: Silver Tone

Net Weight: 61g 

Package Content:

200pcs(+/-2%) x Semi-Tubular Rivet